Fall absorber with lanyarder Y Absorber Pro. It is used to advance on metal structures, the two termination points allow the height worker to be secured at all times. The end of the lanyard must be connected to the anchor point using a carabiner or an anchor (a Maillon carabiner is suitable for connecting to the anchor) with a lock safety. The end of the absorber must be connected to the harness using a carabiner with a locking device. Certified as a fall absorber suitable for personal protection against falls from a height (EN 355). It is used in the fall arrest system with a maximum length of 2 m (total distance of the anchor point and the connection point of the harness). Damping of fall energy is done by means of controlled destruction of the internal strap of the shock absorber, after catching the fall, the shock absorber must be taken out of service. This process is guaranteed under any climatic conditions. The absorber contains a control point (the so-called CONTROL LINE). According to the standard, the use of a fall energy absorber is only possible where the relevant safe height is available.